Sitemap | SetHome | AddFavorite
About Us

About Us

F.A.Q.

News

» NEWS

» Industry News

» Home News

» HOT News

Feedback

Contact Us

Contact Us
contact us
Pingxiang Bowang Industry CO.,LTD.
Add£ºLuxi County Industry District,Pingxiang City,
Jiangxi,China
Tel£º+86-799-7896193
E-mail:sales@carlight8.com
Industry News

Analysis of the future development of LED lamp Market

Edit:¹ÜÀíÔ±   Click:  Date:2016/1/2

LED lamp market can be divided into two blocks, interior and exterior. The so-called interior, refers to the application of the vehicle interior. From the end of the 90's, led began to be applied in the field of interior, as we are familiar with the instrument panel. Instrument panel is the first of some yellow light bulbs, led appear later because the color is rich and colorful, soon replace the light bulb. By about 2002 and 2003, with the maturity of the medium and large power LED, led began to enter the automotive market. At present led in the instrument panel penetration rate of nearly 100%, with a small bulb of the car has been very small. The next few years, should all the car with the dashboard will be used led.
Another piece of the automobile interior application refers to some non functional lighting, such as lamp seat, door handle lamp, reading lamp. Before this type of products will be based on 3-5w light bulbs, but in order to meet the needs of energy saving, so the EU and the United States from two or three years ago, the requirements of led to replace the car interior lighting bulbs. And this LED application of tile number is greater than the instrument panel, dashboard at present are mainly about 0.1W around the red and yellow light or white light LED lamp bead, if this application is basic to white, the power will to about 0.5-1w, output value of the entire will improve. Another piece is the air conditioning controller, touch screen, etc. will also be used in led.
Ben LED is already a very mature market, the annual growth rate is about several points. From the point of view of data in 2013, interior and exterior market was essentially flat, 14 years the market size is more than the inner and outer chamber of the development will be faster.
Next on the exterior, exterior relative to the chamber of LED higher quality requirements. First, the outer chamber will affect the safety, so there is no regulation, inner regulations. The automotive industry led has its own certification regulations, that is, aecq 101.
This regulation for all use in the automotive parts to make a specification for the LED, it will make the high temperature, dry humidity and so will make a request, the whole light must comply with this regulation.
Exterior lights include overlight and lamp rear two parts, overlight refers to the forward light, rearlamp refers to the tail light. Lamp Rear is the first application of the earliest, universal exterior products. Lamp Rear mainly includes such several products, the first is the combination of rear light. This product is used in the red and yellow light LED, low cost, the popularity of fast. From 06-07 onwards, the car began to use a combination of LED rear light. Second high brake lights. The popularity of the LED lamp is also very high, more than 80% of the current high brake lights are using led. Third is the license plate lamp and rear fog lights, reversing lights and other lights. From the past two years, led penetration is also rapidly improving. The power of this piece of the use of LED is relatively high.
Overlighting refers to the forward light, the LED penetration rate increased slowly. This is the use of high power LED white light, high cost. From the performance point of view, the former light is relatively bright, but also the requirements of the LED light distribution is relatively high. So the car lights from the traditional light bulbs to LED technology accumulation, research and development will take time, the certification cycle is relatively long. The first LED prior to the lamp models about 06 years, Audi, Lexus and Cadillac and other high-end models. To the real big development of the lamp is the European Union to develop regulations to install daytime running lights, the car engine to open the day after the lights must be light, so the life expectancy is relatively high. General LED lamps used halogen lamps, halogen lamp life is less than 1000 hours. The European Union in 2011 forced daytime driving lights must be installed, North America is 12 years, the country has not yet mandatory regulations. From the point of view of the depot, the cost of daytime running lights will not increase too much, but consumers may be very high degree of acceptance. We know that the domestic independent brand with foreign than the engine, performance is still a gap, but if more than the shape and lighting is still room for improvement. Domestic independent brand of this enthusiasm is very high, the rapid increase in penetration. And other like before the turn lights, far and near lamps, headlights and other 13 years from the beginning of the LED penetration rate has also been a rapid increase in the trend.
From a global point of view, 13 years of near and far light halogen lamps accounted for about 80%, HID xenon headlights probably accounted for 15%, led accounted for about two points. But the next two or three years of development in the next years may be very fast. We know that currently Benz, BMW, Audi high-end models headlights basically use LED, 15-16, 10 million to 20 million level of the car will be large-scale use of LED. By 2020 we estimate LED headlamp permeability will grow to 20%, hid will shrink to 10%, halogen will remain at about 70%.
In the field of DRL (daytime driving lights), led 13 years of penetration is about 30%, halogen and light bulbs accounted for 20%, and 50% of the car did not use DRL.

Information
Products
Contact Us

About Us

F.A.Q.

News

Feedback

Contact Us

Marker Lights

LED Lights For Specific Vehicle

Driving lights

Car bulbs

Add£ºLuxi County Industrial District,Pingxiang City,Jiangxi,China

Tel£º+86-799-7896193

E-mail:sales@carlight8.com

Server